how to tie a tie
Wearing
a tie combined with a shirt will give a neat and formal impression that
the use of a tie is mostly done in a formal environment such as school
or office. Some
schools in Indonesia require the use of a tie from elementary school
students so that the student's appearance is neat and ensure that the
buttons are placed up to the top or second after the top. Not
every Indonesian likes to wear the first tie because it feels hot and
hot, second because for those who are not accustomed to wearing a tie it
feels like choking. Third is because do not know how to wear them. For
the first and second reason, you can wear a shirt that the collar is
not too tight so it does not feel as hot and tight as choking. For
the third reason, because you can not use it then this time
tipscaratutorial.com will share some ways and tutorial how to wear a tie
for you. May be useful.
How to Wear a Junior - SD Tie
This tie of the type of installation is called Four in Hand Knot. Installation is easy and common so anyone can easily learn and install it. Nodes generated from this tie installation are uneven and small so it is suitable for those of you who have a short neck so that the neck looks skinny. Tie knot is also suitable for semi-formal event if you like. Here is how to apply it
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross right to left and vice versa as in picture, hold with both hands.
Rotate the larger tie section to the back of the small tie section and make sure it is firm.
Replay the larger tie section to the back of the small tie section just below the previous bond, loosen it slightly.
Put the wide end of the tie around the collar near the collar as shown.
Put the wide end of the tie to the previously made bond starting from the top and positioning the tip of the tie face down. Put it through a loose slit that has been made before.
Drag and tighten until the tie is tied and shaped. Adjust the tie so that it fits by arranging or pulling the small and large end of the tie.
How to Use Office Ties
This tie of the type of installation is called Pratt. Installation is easy but not many people know this way so have to get used first to be able to memorize how to install it. The knots generated from this tie is uneven and medium-sized, so it is suitable for those of you who have a formal event and want to look neat without looking too much though not very suitable for events that really ask you to look as neat and se formal as possible. Here is how to apply it
Tie the tie before hanging it to the neck so that tied up later is the inside of the tie that has the pattern of the line.
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross the larger tie into the small tie section near the collar.
Pull and tighten and then rotate to the inside of the tie bond near the collar and remove it.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
How to Wear a Long Tie
This tie of the type of installation is called Half Windsor. Installation is a bit difficult but many people know this way so you can ask for help to install it in this way when you have trouble. Nodes resulting from the installation of this tie flat and medium size so it is suitable for those of you who have a formal event and want to look neat. Here is how to apply it
general, not too easy, medium node, flat node
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross right to left and vice versa as in picture, hold with both hands.
Rotate the larger tie section to the back of the small tie section and make sure it is firm.
Put the end of the tie to the bonding section near the top collar of the previous knot then remove it from the reverse direction like the picture.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
How To Use Formal Office Ties
This tie of the type of installation is called Full Windsor. Although the installation is not easy, many people still wear a tie in this way because the classic and formal impression resulting from a neat, large knot is perfect for formal and important pickles. Here is how to apply it
general, formal, not easy, big knot, neat knot
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross right to left and vice versa as in picture, hold with both hands.
Rotate the larger tie section to the back of the small tie section and make sure it is firm.
Drag the tip of the tie until it is fast enough to the bottom.
Put the end of the tie that has been facing down to the back then Drag it to the opposite side like the picture.
Pull the end of the tie to the top of the collar and then roll it to the tie bond on the collar until the end of the tie faces down.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
How to Wear a School Tie School Elementary School High School
This tie from the type of installation is called Oriental knot. Installation is very easy and fast but the resulting node is small and uneven so it is more suitable for non-formal events. This is how to install it
Tie the tie before hanging it to the neck so that tied up later is the inside of the tie that has the pattern of the line.
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross the larger tie into the small tie section near the collar.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
Once you know how to attach a tie to form a triangle you need to know some unwritten and common rules that are usually believed when wearing a tie
1. Schoolchildren may wear short shirts and ties but if you are a professional who needs to look neat then wear a long sleeve shirt while wearing a tie.
2. For professionals, the tip of the tie should be right at the waist for reasons neatness. Not too short and too long beyond the waist.
3. Your tie should be darker than your shirt
4. The tie covers the buttons of the shirt
5. If you wear a tie clip to keep it from falling apart, it should be fastened to three or fast buttons and keep the width of the clamp not beyond the width of the tie.
A few articles from us, May be useful and inspiring.
How to Wear a Junior - SD Tie
This tie of the type of installation is called Four in Hand Knot. Installation is easy and common so anyone can easily learn and install it. Nodes generated from this tie installation are uneven and small so it is suitable for those of you who have a short neck so that the neck looks skinny. Tie knot is also suitable for semi-formal event if you like. Here is how to apply it
Cross right to left and vice versa as in picture, hold with both hands.
Rotate the larger tie section to the back of the small tie section and make sure it is firm.
Replay the larger tie section to the back of the small tie section just below the previous bond, loosen it slightly.
Put the wide end of the tie around the collar near the collar as shown.
Put the wide end of the tie to the previously made bond starting from the top and positioning the tip of the tie face down. Put it through a loose slit that has been made before.
Drag and tighten until the tie is tied and shaped. Adjust the tie so that it fits by arranging or pulling the small and large end of the tie.
How to Use Office Ties
This tie of the type of installation is called Pratt. Installation is easy but not many people know this way so have to get used first to be able to memorize how to install it. The knots generated from this tie is uneven and medium-sized, so it is suitable for those of you who have a formal event and want to look neat without looking too much though not very suitable for events that really ask you to look as neat and se formal as possible. Here is how to apply it
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross the larger tie into the small tie section near the collar.
Pull and tighten and then rotate to the inside of the tie bond near the collar and remove it.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
How to Wear a Long Tie
This tie of the type of installation is called Half Windsor. Installation is a bit difficult but many people know this way so you can ask for help to install it in this way when you have trouble. Nodes resulting from the installation of this tie flat and medium size so it is suitable for those of you who have a formal event and want to look neat. Here is how to apply it
general, not too easy, medium node, flat node
Cross right to left and vice versa as in picture, hold with both hands.
Rotate the larger tie section to the back of the small tie section and make sure it is firm.
Put the end of the tie to the bonding section near the top collar of the previous knot then remove it from the reverse direction like the picture.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
How To Use Formal Office Ties
This tie of the type of installation is called Full Windsor. Although the installation is not easy, many people still wear a tie in this way because the classic and formal impression resulting from a neat, large knot is perfect for formal and important pickles. Here is how to apply it
general, formal, not easy, big knot, neat knot
Cross right to left and vice versa as in picture, hold with both hands.
Rotate the larger tie section to the back of the small tie section and make sure it is firm.
Drag the tip of the tie until it is fast enough to the bottom.
Put the end of the tie that has been facing down to the back then Drag it to the opposite side like the picture.
Pull the end of the tie to the top of the collar and then roll it to the tie bond on the collar until the end of the tie faces down.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
How to Wear a School Tie School Elementary School High School
This tie from the type of installation is called Oriental knot. Installation is very easy and fast but the resulting node is small and uneven so it is more suitable for non-formal events. This is how to install it
Put a tie around your neck. Do not forget to put all the buttons on your clothes up to the collar. Hang the tip of your tie with the right or the smaller tie part higher than the left or the bigger tie.
Cross the larger tie into the small tie section near the collar.
Pull the big tie horizontally opposite and then enter the inside of the collar. Keep the horizontal section neat and slightly loose as the picture.
Put the tie that is already inside to the loose bond that has been made before.
Gently pull the tie section, trim it by pulling the small tip to tighten.
Once you know how to attach a tie to form a triangle you need to know some unwritten and common rules that are usually believed when wearing a tie
1. Schoolchildren may wear short shirts and ties but if you are a professional who needs to look neat then wear a long sleeve shirt while wearing a tie.
2. For professionals, the tip of the tie should be right at the waist for reasons neatness. Not too short and too long beyond the waist.
3. Your tie should be darker than your shirt
4. The tie covers the buttons of the shirt
5. If you wear a tie clip to keep it from falling apart, it should be fastened to three or fast buttons and keep the width of the clamp not beyond the width of the tie.
A few articles from us, May be useful and inspiring.
Comments
Post a Comment